£7.50
For figure and vehicle finishes. Can be applied by brush or airbrush. AK recommend you - Dilute with AK11500 thinner. Shake well before use. 100ml. Acrylic varnish - MATT
£7.50
For figure and vehicle finishes. Can be applied by brush or airbrush. AK recommend you - Dilute with AK11500 thinner. Shake well before use. 100ml. Acrylic varnish - SATIN
£7.50
For figure and vehicle finishes. Can be applied by brush or airbrush. AK recommend you - Dilute with AK11500 thinner. Shake well before use. 100ml. Acrylic varnish - GLOSS
+3
AK AIRBUSH BASIC LINE 0.3
Reference: AK9000
£37.50
A new basic airbrush that will allow the modeller to perform detail work with ease and maximum precision. Thanks to its 0.3mm nozzle and needle you can spray the paint with total control. The airbrush is easy to clean and maintain. The basic line airbrush is perfect for beginners and all modellers w...
+1
BLACK PRIMER 60ml
Reference: AK178
£4.45
Waterborne polymer primer is available in a black colour perfectly suited for use under all types of colour finishes. Its superb adhesion qualities combined with a matt-satin finish make this primer the perfect choice for preparing models for painting. Only a light layer of primer is re...
+6
CAMOUFLAGE ELASTIC PUTTY
Reference: AK8076
£6.50
Reusable putty for masking areas when airbrushing. Specially designed to leave no residue on any surface. Can be easily removed without damaging other painted areas. Doesn’t stain and is grease free. The best quality product for modellers that can be adapted to any surface and allows both to make ...
DECAL ADAPTER SOLUTION
Reference: AK582
£5.95
Liquid to adapt your decals to any surface. Wet the decal with the solution and a brush after you have placed it. Leave for a few minutes, then with the help of the brush, adapt it to the surface to fully integrate it. With this product no decal will resist, no matter how complicated the surface is....
DETAIL SHINE ENHANCER
Reference: AK9050
£4.95
Detail Shine Enhancer is a special modelling wax developed to create extra shine on certain objects and add more richness to the colours. It can be used on models, dioramas and vignettes, allowing you to achieve different effects on small surfaces, such as grease or wet effects on canvas or floor ti...
+1
£7.00
A product to create texture of cast in any plastic, resin or metal part of your model. It can be used for military, Scify, Gundam or any model branch to create a cast effect only with this acrylic paste. Just extend, work and let dry. Your models will have a complete different appearance. 130g.
+1
£7.00
The best stencil for your modelling needs. Easily enhance visual interest and create the perfect background for weathering. The Airbrush Stencil is flexible, easy to adapt, it doesn’t damage the surface, easy to clean and is versatile enough to be used for any scale.
+1
£6.50
High quality product developed to enhance, repair, and achieve extremely realistic transparent glass-like finishes on clear plastic parts. Simply dip and let dry for a few minutes. The container is wide enough to dip parts without problem. Clean excess around the edges to achieve a uniform layer. Fo...
GLOSSY VARNISH
Reference: AK192
£4.50
Acrylic Glossy Varnish formulated for maximum airbrush performance. Water soluble, odorless, and non-toxic. Shake before each use. AK recommend AK-712 Acrylic Thinner for thinning. Dries completely in 12 hours. 40ml
GRAVEL AND SAND FIXER
Reference: AK118
£5.90
Adhesive to fix down all kinds of earth, gravel, small stones, sand, etc to your bases. This special adhesive, with an alcohol base, is much more effective than the traditional white glue. The white glue tends to leave a plastic finish over the surface giving an unreal aspect and also tends not to e...
+1
GREY PRIMER 60ml
Reference: AK175
£4.45
Grey colour that is perfect for use as a basis for any colour. Its superb adhesion qualities combined with a matt-satin finish makes the primer the perfect choice for preparing models for painting. Only a light layer of primer is required for full, effective coverage. Water soluble...
+1
£5.95
High quality product to create a protective and very realistic glossy sheen to areas where applied. This product also serves as a protective layer for the paint underneath. Apply in the way you would with any varnish. Apply and let dry for a few minutes. This product can also serve as a perfect fini...
LIQUID MASK
Reference: ABT115
£6.50
Liquid mask is quite popular among modellers for protecting parts that don’t need to be painted. Liquid mask has a characteristic blue tone and sweet smell of vanilla, is not aggressive and will not cause damage even on clear plastic parts. It dries quickly leaving the masked surface free of paint...
MATTE VARNISH
Reference: AK190
£4.50
A high quality matte varnish which can be applied with a brush or an airbrush to achieve a dead flat finish on any surface. Acrylic Matte Varnish formulated for maximum airbrush performance. Water soluble, odorless, and non-toxic. Shake before each use. AK recommend AK-712 Acrylic Thinner for ...
+1
METAL BURNISHING FLUID
Reference: AK159
£5.95
With Metal Burnishing fluid, you can naturally weather and rust white metal tracks. Just dip the tracks in the liquid for a few seconds and the metal will begin to appear dark and rusty very quickly, easily and effortlessly. You can vary the effect using different dilutions and varying lengths of so...
MODELLING GREY PUTTY
Reference: AK104
£4.50
High quality grey acrylic putty, standard hardness (20ml, 39 gr.). Polyurethane water based one component product. It does not shrink when drying. Specially designed for modelling. Superfine filler with perfect adhesion and sanding properties. It is water based so there is no smelly chemicals in the...
MODELLING WHITE PUTTY
Reference: AK103
£4.50
High quality white acrylic putty, extra hard, (20 ml, 39 gr.). Polyurethane water based. One component product. It does not shrink when drying. Specially designed for modelling. Superfine filler with perfect adhesion and sanding properties. It is water based so there is no smelly chemicals in the mi...